Skip to main content

Power washing has long been recognized as an effective method for cleaning various surfaces, including concrete. But what about its effectiveness in removing concrete sealer? Can power washing truly eliminate sealer from concrete surfaces?

power washer removing concrete sealer under stairs

Will Power Washing Remove Concrete Sealer?

The quick answer is yes, power washing can indeed remove sealer from concrete surfaces. When performed correctly and with the appropriate equipment, power washing can effectively strip away layers of sealant, restoring the natural appearance of the concrete. However, there are a few things you should know about Power Washing before you go out and rent a power washer. 

Why You Shouldn’t Rent a Power Washer…

We understand the value and importance for most homeowners to manage and DIY their home maintenance. However, the biggest reason you shouldn’t rent a power washer if its your first time, is because it can get very expensive very quickly, especially if you don’t understand the equipment you are working with. 

If you don’t take our word for it, consider this article from Modern Painting discussing all the ways Power Washing DIY projects can quickly blow through your budget. 

power washer removing dirt and grime on concrete tiles

How does Concrete Sealer Work? 

Concrete sealers are designed to provide a protective barrier against stains, moisture, and other elements that can cause damage. However, over time, these sealers may wear off or become discolored, requiring removal and reapplication.

Why Power Washing Removes Concrete Sealer

Power washing utilizes high-pressure water jets to forcefully remove dirt, grime, and even stubborn sealant from the surface of the concrete. The force exerted by the water stream combined with specialized nozzles helps break down and dislodge the sealer particles.

powerwasher removing dirt on tiles

Tips for Power Washing Concrete Sealer

If you are doing your own Power Washing job to remove concrete sealer, here are some nifty tips and tricks you can use to get the most out of your power washer. 

Verify Your Equipment is Up to the Task

It is important to note that not all power washers are suitable for this task. Using too much pressure or incorrect techniques can potentially damage the underlying concrete surface. Therefore, it is recommended to hire professionals who have experience in power washing specifically for concrete sealer removal.

Use the Right Distance and Angle 

Another critical aspect to consider is the distance and angle of the power washer nozzle. Holding the nozzle too close to the concrete can etch the surface, leaving permanent marks. 

 

A good rule of thumb is to keep the nozzle at least 12 inches away from the surface and to use a sweeping motion. This method ensures a uniform cleaning pattern and reduces the risk of concentrated pressure on one spot. 

Use a Fan Tip 

 

Always use a fan-tip nozzle instead of a zero-degree nozzle. The fan tip spreads the water over a larger area, reducing the force of impact on a single point. 

Avoid Direct Sunlight 

 

It’s also advisable to avoid power washing in direct sunlight. The heat can cause the sealer to soften, making it more vulnerable to damage. Opt for a cooler part of the day, such as early morning or late afternoon, for your power-washing endeavor.

Consider Hiring an Expert 

When performed by experts using proper equipment and techniques, power washing can be highly effective in removing sealer from concrete surfaces. It offers a convenient and efficient solution for restoring the natural beauty of your concrete while preparing it for resealing if desired.

 

Pro’s and Cons of Using a Power Washer to Remove Concrete Sealer

Power washers are frequently used to help remove concrete sealer but there are some things you need to be aware of if you are considering doing your own power washing job. 

Pros:

  • Efficiency and speed in removing surface dirt and grime
  • Potential removal of a worn-out or damaged sealer layer
  • Cleansing deep into the pores of the concrete surface

Cons:

  • Potential damage to the underlying concrete if not done properly or with excessive pressure
  • Incomplete removal of stubborn or deeply penetrated sealers
  • Risk of creating uneven or streaky appearance on the surface due to improper technique or equipment settings

If you need help with Power Washing your home or driveway in Utah, consider reaching out to our team of experts in power washing services. Our team can help you get the perfect powerwashing job done just right, regardless of if you need it for a commercial, residential or contract job. 

Call Powerstream USA Today: 801 750 8347